Categories
UK Delivery

 UK mainland 
1-3 working days delivery for in stock items (unless stated otherwise on the product page); may be longer for rural postcodes.
*FREE DELIVERY to London and 
other selected postcodes on selected items only on orders over £500
For more information 
click here

Speaker vibration isolation mounts

Speaker vibration isolation mounts
Product Code: V500
Availability: Estimated 1 week
Price: £15.75

Available Options


* Speaker Mount Code:

Qty:        

Structural Anti-vibration hangers for speakers

For effective structural vibration isolation specific suspension mounts are required to prevent noise from speakers entering the structure. Usually speakers are directly connected via rigid brackets to walls or ceilings. This transmits high levels of vibrational energy into the structure which will then travel almost unhindered throughout a building.

Our ST Range of anti-vibration hangers can take loads from 5kg up to 60kg. Usually a minimum of 2 or 3 are used per speaker so to work within their designed deflection loadings the speaker needs to weigh at least 5kg (using two hangers). They provide a high degree of structure borne noise isolation, thanks to their low stiffness they are capable of achieving natural frequencies ranging from 3 to 4Hz.

cutaway speaker anti-vibration hanger

The mounts are fixed to the ceiling using suitable screws or bolts (via the 6mm top hole) and the soft foam top needs to be compressed by about 3mm via tightening of the fixing. A threaded M6 rod is secured to the spring top housing and down to a suitable sidebeam or back plate fixed to the speaker body.

TECHNICAL DATA:

Type Max. permanent load (kg) Weight (kg)
ST-5 5 0.198
ST-10 10 0.198
ST-20 20 0.198
ST-30 30 0.198
ST-60 60 0.198

The design of these acoustic hangers is composed of:

  • 1. Metal parts that are mechanically failsafe.
  • 2. A rubber moulded part equipped with an end stroke buffer in case the acoustic hanger is ever overloaded.
  • 3. A prime degree steel coil spring to provide low natural frequency to the acoustic hanger.
  • 4. A Sylomer layer to isolate mid-high frequencies that could travel through the coil spring.

ST5 speaker vibration isolation technical drawingST5 speaker vibration isolation technical data

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Custom Audio Designs - Soundproofing and Acoustics © 2019
View Mobile / Standard