soundproofing noise control acoustic
Independent Acoustics and Noise Control Specialists		  

Acoustic Screens | Sound Screens | Office Screens | Industrial Screens
sound proofing soundproofing acoustic insulation
Acoustic Office Screens Variable acoustic screens sound screens Acoustic Office Screens Variable acoustic screens sound screens Acoustic Office Screens Variable acoustic screens sound screens Acoustic Office Screens Variable acoustic screens sound screens Acoustic Office Screens Variable acoustic screens sound screens
isolation mounts for machinery


Assembly Instructions

The SCH mounts should be assembled according to the following installation instructions. There are two possible configurations, see assembly 1 and assembly 2, for which the recommendations given in the following chart must be observed. They can be installed in plates of different thicknesses according to the Tmax and Tmin values given in the table at the bottom. The load vs. deformation curves will vary according to the thickness of the plate on which the mount is to be installed. 		  DESCRIPTION

SCH Mounts

The SCH Type mounts are made of two parts of rubber, one of which bears an inside metal bushing which acts as a guide through the machine anchoring screw.

It is installed pre-compressed on the actual machine frame whose thickness "E" determines the degree of precompression.

TECHNICAL CHARACTERISTICS

This antivibration mount is ideal for applications of major dynamic loads where movement control is necessary, such as in the cabins of all types of mobile vehicles. It also offers optimal stability, as well as good attenuation of impacts and vibrations.


acoustic screens
©Custom Audio Designs

Valid HTML 4.01 Transitional