 Independent Acoustics and Noise Control Specialists |
 |
|
Acoustic Screens | Sound Screens | Office Screens | Industrial Screens | ||
 | ||
 |
 |
 |
 |
 |
|
 |
BOBBINGS
Bobbings are devices for making elastic anchorings or fixings. They can be used in a wide variety of applications, particularly for elastic suspensions and anti-vibration isolation of machines and different mechanical items. They are made of a block of rubber with two parallel metal parts at the end which enable it to be fixed either by screws in the 'C' model or with nuts in the 'A' modeal or a combination of both in the 'B' model. |
|
|
The rubber block may be cylindrical in cases requiring greater load capacity or as a diablo when greater elasticity is required in all directions.
OPERATION AND ASSEMBLY Its elasticity is much greater in all the directions parallel to the armatures than in the perpendicular direction. The rubber works based on compression or shear depending on the direction it is placed at installation time. This direction is made according to the use and the objective. It is therefore installed with nuts or screws depending on the model chosen, with one part attached to the fixed chassis and the other to the machine to be suspended. TECHNICAL CHARACTERISTICS Depending on the size of the rubber block, the bobbing has more or less elasticity, which is greater particularly in all directions perpendicular to its axis (shear). The bobbing thus makes it possible to make joins which permit major relative movements, up to several millimetres (in the case of heat expansion, chassis deformations, etc.). The bobbing serves very well for the vibration isolation of machines where the vibrations are perpendicular to their axis, unless these stresses are too much when applied in this direction. ADVANTAGES APPLICATIONS The bobbins are particularly suitable for installation on small motor-pumps, motor-ventilators, driers, sieves, compactors, washing machines, electrical motors, on-board control panels, measuring apparatuses, control cabinets, microphones, fluorescent tubes, etc. | ||
| ||
|
TYPE A BOBBINGS OPERATION AND ASSEMBLY Their elasticity is much greater in all the directions parallel to the armatures than in the perpendicular direction. The rubber works based on compression or shear depending on the direction it is placed in at installation time. This direction is made according to the use and the objective. It is therefore installed with nuts or screws depending on the model chosen, with one part attached to the fixed chassis and the other to the machine to be suspended. APPLICATIONS The bobbins are particularly suitable for installation on small motor-pumps, motor-ventilators, driers, sieves, compactors, washing machines, electrical motors, on-board control panels, measuring apparatuses, control cabinets, microphones, fluorescent tubes, etc. 
|
|
|
| ||
|
TYPE B BOBBINGS OPERATION AND ASSEMBLY Their elasticity is much greater in all the directions parallel to the armatures than in the perpendicular direction. The rubber works based on compression or shear depending on the direction it is placed in at installation time. This direction is made according to the use and the objective. It is therefore installed with nuts or screws depending on the model chosen, with one part attached to the fixed chassis and the other to the machine to be suspended. APPLICATIONS The bobbins are particularly suitable for installation on small motor-pumps, motor-ventilators, driers, sieves, compactors, washing machines, electrical motors, on-board control panels, measuring apparatuses, control cabinets, microphones, fluorescent tubes, etc. 
|
|
|
| ||
|
TYPE C BOBBINGS OPERATION AND ASSEMBLY Their elasticity is much greater in all the directions parallel to the armatures than in the perpendicular direction. The rubber works based on compression or shear depending on the direction it is placed in at installation time. This direction is made according to the use and the objective. It is therefore installed with nuts or screws depending on the model chosen, with one part attached to the fixed chassis and the other to the machine to be suspended. APPLICATIONS The bobbins are particularly suitable for installation on small motor-pumps, motor-ventilators, driers, sieves, compactors, washing machines, electrical motors, on-board control panels, measuring apparatuses, control cabinets, microphones, fluorescent tubes, etc. 
|
|
|
| ||
|
| |||
| ©Custom Audio Designs | |||
|
| |||