soundproofing noise control acoustic
Independent Acoustics and Noise Control Specialists		  

Acoustic Screens | Sound Screens | Office Screens | Industrial Screens
sound proofing soundproofing acoustic insulation
Acoustic Office Screens Variable acoustic screens sound screens Acoustic Office Screens Variable acoustic screens sound screens Acoustic Office Screens Variable acoustic screens sound screens Acoustic Office Screens Variable acoustic screens sound screens Acoustic Office Screens Variable acoustic screens sound screens
isolation mounts for machinery
  DESCRIPTION

ATP Mounts

The ATP Mount is an elastic mount designed to provide anti-vibration isolation for medium and high frequencies in any kind of machines.

The top part has a hood shaped armature to protect the rubber from oil, grease, petrol, diesel, dust etc.

OPERATION AND ASSEMBLY

The rubber on the ATP mount works at shear, ending in the form of a progressive stop which makes it possible to limit the elastic end of stroke at shear, in the event of impacts or transient overloads, as occurs in the case of apparatus on vehicles.

Thus, as of the deflection indicated in the catalogue it presents a gradually decreasing flexibility with load. This offers optimal conditions to solve an aperiodic suspension.

The ATP mounts may be secured to the floor or ground via threaded rod claws inserted into the concrete. They can also be screwed in between the base of the machine and the metal chassis.

TECHNICAL CHARACTERISTICS

The elastomer used is a compound based on natural rubber specially modified to obtain good aging at alternate deformations.

The load capacity is given in the catalogue for the maximum static load admitted, and can withstand strong overloads.

The flexibility in an ATP mount is approximately 4 times more rigid in the radial direction than in the axial direction.


ADVANTAGES

  • Direct placement of the machine on the floor as required.
  • Quick placement of the elastic mounts
  • Protection of the rubber from aggressive agents
  • Fixing by bolts or screws
  • Efficient three "standard" varieties marked on each part (Soft: hardness A45, Medium: hardnessB60, Hard: hardness C75) enabling the user to choose the most suitable mount for the load to be supported and the vibration frequency. The possibility of doubling its elasticity by placing two DSD mounts serially for each support point.

    APPLICATIONS

    In all assemblies where "pitching" of the unit suspended needs to be avoided, as well as the protection of the rubber and the possibility of supporting loads.
  • Medium and high frequency motor compressor units
  • Gen sets
  • Hydraulic units
  • Marine aux units
  • Ventilators etc.


    • acoustic screens
    ©Custom Audio Designs

    Valid HTML 4.01 Transitional