 Independent Acoustics and Noise Control Specialists |
 |
|
Vibration | Isolators | Anti vibration | damping mounts | ||
 | ||
 |
 |
 |
 |
 |
|
VIBRATION ISOLATION MOUNTS | ||
| Click on the numbers to see more products in our range:
BACK
1
2
3
4
5
NEXT
| ||
 |
CB Mounts
CB Mounts are installed in pairs. Installation is simplified as both mounts are fixed through with one through bolt and a washer at each end. |
|
| ||
 |
Hydraulic Mounts
Hydraulic Mounts combine a spring and a hydraulic damper in a single compact unit that allowss tuning the spring and the damper independently. |
|
| ||
 |
SH Mounts
SH Mounts consist of two heavy duty square outer plates with corner hole fixings fully bonded to circular profiled rubber layers separated by interleaf plates. |
|
| ||
 |
BRB Mounts
BRB Mounts are anti-vibration elements which work the rubber in shear and compression. Their tall height profiles produce large deflections, low natural frequencies and excellent vibration isolation results. This range of mounts is suitable for applications where high vibration isolation in the 85-95% range is a priority. |
|
| ||
 |
BSB Mounts
BRB Mounts are anti-vibration elements which work the rubber in shear and compression. Their tall height profiles produce large deflections, low natural frequencies and excellent vibration isolation results. This range of mounts is suitable for applications where high vibration isolation in the 85-95% range is a priority. |
|
| ||
 |
Marine Mounts
Marine Mounts are ideal for mobile applications thanks to their rugged design. |
|
| ||
 |
Cone Mounts
Cone Mounts work the rubber in shear compression. They are composed of two parallel conical metal parts. They have two washers, one as a buffer and the other for centreing. |
|
| ||
 |
Cabine Mounts
The Cabine Mount is composed of two main metal parts. Both metal parts are bonded to a high resilient rubber for optimum vibration isolation.. |
|
| ||
 |
MD Mounts
The MD Mounts have similar architecture to the BSB and BRB. The advantage of this mount is that it is a high-damping elastic compound. |
|
| ||
 |
Cone100 Mounts
The Cone100 mount works the elastomer at shear compression. It is comprised of a high strength external metal armour and a conical internal armour which includes a leveller to align the suspended unit. |
|
| ||
 |
VD Mounts
VD Mounts work the elastomer at shear compression. It is comprised of 2 metal parts which allow it to be installed with its two built-in screws. |
|
| ||
 |
V Marine Mounts
The V marine mounts work the elastomer at shear compression. It is comprised of two metal parts which permit its installation by means of a screw at the top and two holes for securing it to the chassis. |
|
| ||
| Click on the numbers to see more products in our range: BACK 1 2 3 4 5 NEXT | ||
|
| |||
| ©Custom Audio Designs | |||
|
| |||