soundproofing noise control acoustic
Independent Acoustics and Noise Control Specialists		  

Robust Details | Acoustic Battens | Resilient Floor Battens | Acoustic Flooring
sound proofing soundproofing acoustic insulation
Acoustic Resilient Floor Battens Acoustic Resilient Floor Battens Acoustic Resilient Floor Battens Acoustic Resilient Floor Battens Acoustic Resilient Floor Battens
Acoustic Resilient Floor Battens
acoustic batten acoustic batten acoustic battenacoustic batten

Shallow and Deep - Acoustic Resilient Composite Floor Battens
USES:
  • Concrete or Timber Floors.
  • New Builds and Conversions.
  • Meets New Part E Building Regs.
  • Meets New RSD Details.
 BENEFITS:
  • High Acoustic Performance.
  • Very Easy to Install.
  • Services can run underneath.
  • Made from recyclable materials.
  • Maintenance Free.
Acoustic Resilient Composite Floor Battens UK   The Isocheck shallow batten system is designed to reduce sound transmission through a concrete structural sub-floor and consists of a layer of 13mm LRC foam bonded to a softwood batten.

When installed as part of a complete party floor construction it enables a concrete floor to meet the sound transmission standards of ADE 2003 (amended 2004). Should the requirement be for a batten height other than that detailed on this page please contact us for further advise of suitability and availability.

Product Data
acoustic resilient floor battensOverall Batten Size: 2400mm x 45mm x 45mm*
acoustic resilient floor battensResilient Layer Thickness: 8mm
acoustic resilient floor battensResilient Layer: X-link Isopol
* alternative batten depths are available 54mm, 61mm and 70mm or custom to special order.
acoustic resilient floor battens Performance

Treated floor meets with the descriptive FFT3, typically within Robust Detail E-FC-2.
Using deeper battens (min. 70mm would conform to FFT1 within E-FC-2 and E-FC-7.

  • 18mm or 22mm chipboard deck.
  • Isocheck shallow battens @ 400mm max. centres.
  • min. 250mm in-situ concrete floor slab, 2400kg/m³ min density.
  • min 40mm, 80kg/m² screed applied directly to slab.
  • Suitable RD approved metal ceiling system.
  • Acoustic flanking band reduces the impact vibration leaking via structural walls and assists in reducing airborne and impact sound paths.


Performance

Treated floor meets with the descriptive FFT3, typically within Robust Detail E-FC-1.
Using deeper battens (min. 70mm) would conform to FFT1 within E-FC-1 and E-FC-7.

  • 18mm or 22mm chipboard deck.
  • Isocheck shallow battens @ 400mm max. centres.
  • min. 40mm, ≥80kg/m² bonded screed.
  • min. 150mm hollow core concrete plank (300kg/m²).
  • Suitable RD approved metal or timber ceiling system.
  • Acoustic flanking band reduces the impact vibration leaking via structural walls and assists in reducing airborne and impact sound paths.
SPECIFICATION:

The acoustic floor shall be:
Isocheck Shallow Batten, by Custom Audio Designs Ltd, Unit 2, Amey Industrial Estate, Petersfield, Hampshire, GU32 3AN and installed in accordance with manufacturer's instructions / recommendations.


acoustic battenDOWNLOAD PDF

acoustic battenDOWNLOAD INSTALLATION DETAILS

EcoCheck Deep Batten system is designed to reduce sound transmission through timber floors within a timber frame structure.

EcoCheck Deep Batten consists of a batten bonded to 15mm LRAC. When installed as part of a complete party floor construction it enables a timber floor to meet the sound transmission stadards of ADE 2003 (amended 2004).

Should the requirement be for a batten height higher than that detailed here please contact us for further technical advise and suitability.



Product Data
acoustic resilient floor battensOverall Batten Size: 1800mm x 45mm x 75mm O/A
acoustic resilient floor battensResilient Layer Thickness: Down to approx. 13mm under a normal domestic load.
acoustic resilient floor battensResilient Layer: 15mm LRAC
acoustic batten Performance

Treated floor meets with the descriptive FFT1, typically within Robust Details E-FT-1 and E-FT-2 and E-FT-3.
  • 18mm (min) T&G chipboard and 19mm plasterboard plank.
  • Ecocheck deep battens @ 400mm max. centres perpendicular to the joists.
  • min. 60mm, 45kg/m³ mineral wool between battens.
  • min. 15mm thick floor decking.
  • min. 240mm timber I-joists at max. 400mm centres.
  • min. 100mm thick, 45kg/m³ mineral wool between joists.
  • min. 24kg/m² double boarded ceiling on resilient bars perpendicular to joists.
  • Acoustic flanking band reduces the impact vibration leaking via structural walls and assists in reducing airborne and impact sound paths.


Performance

Treated floor meets with the descriptive FFT1, typically within Robust Details E-FT-1 and E-FT-2 and E-FT-3.

  • 18mm (min) T&G chipboard and 19mm plasterboard plank.
  • Ecocheck deep battens @ 400mm max. centres perpendicular to the joists.
  • min. 60mm, 45kg/m³ mineral wool between battens.
  • min. 11mm thick OSB floor decking.
  • min. 220mm solid timber joists at max 400mm centres.
  • min. 100mm thick, 45kg/m³ mineral wool between joists.
  • min. 24kg/m² double boarded ceiling on resilient bars perpendicular to joists.
  • Acoustic flanking band reduces the impact vibration leaking via structural walls and assists in reducing airborne and impact sound paths.


SPECIFICATION:

The acoustic floor shall be:
Ecocheck Deep Batten, by Custom Audio Designs Ltd, Unit 2, Amey Industrial Estate, Petersfield, Hampshire, GU32 3AN and installed in accordance with manufacturer's instructions / recommendations.


acoustic battenDOWNLOAD PDF

acoustic battenDOWNLOAD INSTALLATION DETAILS



GENERAL DATA
ProductMinimum Void HeightTypical Application
Part CodeHeightWidthLengthTimber (RSD)Concrete (RSD) 
AB4545mm45mm1800mm 45mmE-FC-1, E-FC-2, E-FC-7
AB5454mm45mm1800mm 45mmE-FC-1, E-FC-2, E-FC-7
AB6161mm45mm1800mm 45mmE-FC-1, E-FC-2, E-FC-7
AB7070mm45mm1800mm 70mmE-FC-1, E-FC-2, E-FC-7
AB7575mm45mm1800mm70mm E-FT-1, E-FT-2, E-FT-3, E-FS-1, E-FS-2
resilient composite floor battens

All information contained in these details is given in good faith but without warranty.
Custom Audio Designs reserves the right to alter the specifications of any product without notice.
©Custom Audio Designs 2009

Valid HTML 4.01 Transitional