soundproofing noise control acoustic
Independent Acoustics and Noise Control Specialists		  

Acoustic Sheet | Enclosure Insulation | Soundproofing | Acoustic Foam Barrier Composite
sound proofing soundproofing acoustic insulation
Foam laminated sound barrier composites Foam laminated sound barrier composites Foam laminated sound barrier composites Foam laminated sound barrier composites Foam laminated sound barrier composites
Foam laminated sound barrier composites
foam laminated sound barrier mats
USES:
  • Enclosure Linings
  • Suitable for machine noise
  • Suitable for pump noise
 BENEFITS:
  • Easy DIY Installation
  • High sound reduction
  • Easy to cut
  • Handy sized sheets

FOAM/BARRIER COMPOSITE SHEETS
Part Code F100

Consist of Class0 fire resistant, high performance, sound absorbing acoustic foam each side of our mineral loaded polymeric soundproofing barrier matting. 		sandwich foam laminated sound barrier sheet

This composite is specifically designed to reduce noise from enclosed areas where a high degree of soundproofing is required combined with fire resistance to class0. This materials should be applied with the thin layer of acoustic foam fixed to the substrate and the thicker layer of foam facing the noise source.

These laminates can reduce the sound within an enclosure by 15-25dB.

Sound Reduction Index on 12mm Plywood Rw 27dB
Sound Reduction Index on 0.7mm Steel Rw 30dB

25mm Class0 foam / soundproofing mat / 6mm class0 foam

Can also be supplied (subject to minimum orders) with a self adhesive backing.
Can also be supplied (subject to minimum orders) with an aluminium foil facing.
acoustic curtainsDownload PDF

Foam/Barrier Composite Soundproofing Mat
Colour:Black
Sheet Size:1m x 600mm
Thickness:nom. 33mm
Density of Foam:nom. 100kg/m³
Weight of Barrier:5kg/m²
Flammability: 
BS476 Part 6&7Class0
FMVSS302Zero Burn Rate, Self-extinguishing
acoustic curtains
High Performance Acoustic Insulation Range

2 FT (45 or 80) High Performance Acoustic Insulation Range
acoustic curtainsDownload PDF
acoustic curtains
PRODUCT DESCRIPTION

2FT45 (Part Code A180) or 2FT80 (Part Code A190) is a soundproofing composite made up of the polymer-based, asphalt-free 8.0kg/m² synthetic acoustic membrane bonded both sides with a 10mm layer of porous acoustic felt mats, both formed in such a way as to offer excellent acoustic insulation in different building elements: walls, ceilings, roofs, etc.

PROPERTIES
High acoustic insulation, combined with soft, flexible elements (plasterboard, wood conglomerate).
  • Easy handling and application.(does not make you itch!)
  • Easy overlapping.
  • Cold- and heat-resistance.
  • Self-extinguishing.
  • Excellent ageing resistance.
  • Rotproof
PACKAGING AND STORAGE
The product is supplied in two types of superficial density:

Typekg/m²Thickness (mm)PackagingUnits per pallet*
2 FT 454.7266 x 1.05-m rolls6 rolls (36 m²)
2 FT 808.2285 x 1.05-m rolls6 rolls (34.7 m²)
*This surface corresponds to the true surface applied, given the 5-cm overlap.

TECHNICAL DATA
TestValue
Tensile strength (UNE 104-281/6.6)> 30 N/cm² (Membrane)
Thermal conductivity coefficient0.037 W/m.°C (felt)
Fire resistanceSelf-extinguishing

USES
  • Soundproofing of horizontal (ceilings) and vertical enclosures, where excellent soundproofing against airborne noise is required.
  • Specially recommended between block or partition cavity walls.
  • Can be used between joists as a higher performance alternative to our acoustic quilt.
  • Soundproofing against airborne noise in flat roofs.
  • Can be fixed against a wall with framework pushed against it for improved isolation and noise reduction.
For further information see examples in systems sheets.
High Performance Acoustic Insulation Range

FT 75 High Performance Acoustic Insulation Range
acoustic curtainsDownload PDF
acoustic curtains
PRODUCT DESCRIPTION

FT 75 is a soundproofing composite made up of the polymer-based, asphalt-free 7.5kg/m² synthetic acoustic membrane bonded one side with a 10mm layer of porous acoustic felt mats, both formed in such a way as to offer excellent acoustic insulation in different building elements: walls, ceilings, roofs, etc.

PROPERTIES
High acoustic insulation, combined with soft, flexible elements (plasterboard, wood conglomerate).
  • Easy handling and application. (does not make you itch !)
  • Easy overlapping.
  • Cold- and heat-resistance.
  • Self-extinguishing.
  • Excellent ageing resistance.
  • Rotproof.
PACKAGING AND STORAGE
The product is supplied in two types of superficial density:

Typekg/m²Thickness (mm)PackagingUnits per pallet*
FT 404.1126 x 1.05-m rolls6 rolls (36 m²)
FT 757.6145 x 1.05-m rolls6 rolls (34.7 m²)
*This surface corresponds to the true surface applied, given the 5-cm overlap.

TECHNICAL DATA
TestValue
Tensile strength (UNE 104-281/6.6)> 30 N/cm² (Membrane)
Thermal conductivity coefficient0.037 W/m.°C (felt)
Fire resistanceSelf-extinguishing

USES
  • Soundproofing of horizontal (ceilings) and vertical enclosures, where excellent soundproofing against airborne noise is required.
  • Specially recommended in partition walls.
  • Soundproofing against airborne noise in ceilings.
  • Reduction of impact noise level in all types of floors, applied underneath the flooring.
  • Can be fixed over frameworks before the plasterboard sheets are attached for improved isolation and sound blocking.
  • Can be fixed against a wall with framework pushed against it for improved isolation and noise reduction.
For further information see examples in systems sheets.

INSTRUCTIONS FOR USE
Installation of the membrane: Prior to installation of the membrane on the substrate, STAPUT Adhesive must be applied to both the substrate and the complex, allowing it to dry tacky before applying the composite. Align the 2FT complex on the substrate, and install.

Laps: Overlap 5 cm both vertically and horizontally. Care must be taken to always seal the laps correctly, either with adhesive or tape, as small openings can considerably reduce the level of acoustic insulation required.

SUPPORT
2FT lends itself to all types of normal building substrates. The substrate must be even, clean and dry, and preferably rendered. If the rendering is old, its condition must be checked to avoid adherence problems of 2FT to the rendering.
You need to either upgrade your Flash Player or install Flash or turn on Javascript to view missing content. You can download the pluggin from Adobe Here.
RW 53dB INTERNAL PARTITION SOLUTION 1
Interior partition comprising a 50mm central stud frame, acoustic mineral wool infill, FT 40 composite fixed to one face with 2 layers of 12.5mm plasterboard fixed either side of the frame.
The system below was tested with the lighter 4kg/m² composite. Performance would be improved by around 3dB using the 7.5kg/m² material.
acoustic curtains
  • 1. 2 layers of 12.5mm plasterboard.
  • 2. Neoprene isolation tape around perimeter.
  • 3. FT 40 or FT 75 (felt side against plasterboard).
  • 4. 50mm thick 60kg/m³ acoustic mineral wool.
  • 5. Flooring.

(All perimeters finished with acoustic sealant).
You need to either upgrade your Flash Player or install Flash or turn on Javascript to view missing content. You can download the pluggin from Adobe Here.

Foam laminated sound barrier composites

All information contained in these details is given in good faith but without warranty.
Custom Audio Designs reserves the right to alter the specifications of any product without notice.
©Custom Audio Designs 2003-2006

Valid HTML 4.01 Transitional