soundproofing noise control acoustic
Independent Acoustics and Noise Control Specialists		  

Acoustic Flooring | Robust Details FFT5 | Floor Insulation | Acoustic Flooring
sound proofing soundproofing acoustic insulation
IsoBoard15, FFT-5, E-FC-1, E-FC-2, E-FS-1 compatible IsoBoard15, FFT-5, E-FC-1, E-FC-2, E-FS-1 compatible IsoBoard15, FFT-5, E-FC-1, E-FC-2, E-FS-1 compatible IsoBoard15, FFT-5, E-FC-1, E-FC-2, E-FS-1 compatible IsoBoard15, FFT-5, E-FC-1, E-FC-2, E-FS-1 compatible
IsoBoard15, FFT-5, E-FC-1, E-FC-2, E-FS-1 compatible
Acoustic Overlay System IsoBoard 15
USES:
  • Separating Floors.
  • Concrete Floors.
  • Robust Detail FFT5 Compliant.
  • Kitchen and bathroom areas.
 BENEFITS:
  • Robust Detail Compliant FFT5.
  • Provides significant reduction in impact noise and vibration.
  • Easy to install.
  • 15mm thick, does not significantly increase the floor level.
  • Handy size 1200x600mm sheets.
acoustic flooringDownload PDF

Acoustic Overlay Board IsoBoard 15

Acoustic overlay board Type 15 is designed to provide excellent acoustic sound insulation with ease of installation. No need for separate isolation layers and T&G chipboard. The product is a pre-bonded laminate of 6mm Recycled Isofiber resilient felt bonded to the bottom of a strong, thin, 9mm tongue and grooved moisture resistant MDF chipboard.

Supplied in handy sized 1200x600mm sheets for ease of installation this thin 15mm composite board is one of the thinnest and hardwearing solutions available.
You need to either upgrade your Flash Player or install Flash or turn on Javascript to view missing content. You can download the pluggin from Adobe Here.
Tested Performance of the Above Structure:-
  Airbourne              Impact
DnT,w+Ctr=  48dB    L'nT,w=  52dB

For concrete floors. IsoBoard 15 meets the Robust Details for Floating Floor Treatment 5 (FFT-5), for constructions E-FC-1, E-FC-2 and E-FS-1.
You need to either upgrade your Flash Player or install Flash or turn on Javascript to view missing content. You can download the pluggin from Adobe Here.
Tested Performance of the Above Structure:-
  Airbourne              Impact
DnT,w+Ctr=  51dB    L'nT,w=  52dB

GENERAL INSTALLATION INSTRUCTIONS:
  • Lay the boarding over a level floor, in a stretcher bond pattern, applying wood glue to all tongued and grooved panel joints.
  • Fix the acoustic flanking band to the edges of the boards before they are pushed up against the perimeter walls to isolate the boards from touching the wall.
  • Install the skirting ontop of the flanking strip then cut away any excess flanking strip.
    • GENERAL PHYSICAL DATA
    Sheet Size:1200 x 600mm
    Thickness:15mm
    Approx. weight:7kg/m²
    Full System Fire Protection:60 minutes

    acoustic flooring IsoBoard15, FFT-5, E-FC-1, E-FC-2, E-FS-1 compatible



    All information contained in these details is given in good faith but without warranty.
    Custom Audio Designs reserves the right to alter the specifications of any product without notice.
    ©Custom Audio Designs 2009

    Valid HTML 4.01 Transitional