IsoMat RC3 IsoMat RC5
Independent Acoustics and Noise Control Specialists		  

Acoustic Underlay | Laminate Underlay | Impact Reduction | Acoustic Flooring
sound proofing soundproofing acoustic insulation
EcoMat RC3 and EcoMat RC5 EcoMat RC3 and EcoMat RC5 EcoMat RC3 and EcoMat RC5 EcoMat RC3 and EcoMat RC5 EcoMat RC3 and EcoMat RC5
EcoMat RC3 and EcoMat RC5
EcoMat RC3 and EcoMat RC5 Acoustic Rubber Cork Composite Floor Covering Underlay
Suitable for:
  • Ceramic tile.
  • Sheet vinyl.
  • Stone floors.
  • Wood.
  • Parquet.
  • Flotex.
  • Marble.
  • New build and refurbishment.
  • Underfloor heating.
 BENEFITS:
  • Easy Installation.
  • High impact reduction.
  • Remains continually elastic.
  • Suitable under most substrates.
  • Ultra thin.
  • Good thermal properties.
  • Part E Compliant.
  • Fully recycled.
Download PDF

EcoMat RC3 and EcoMat RC5 - Acoustic Rubber/Cork Composite Underlay
(Part Code A412 and A414)

EcoMat RC3 and EcoMat RC5 acoustic matting is a Document E compliant resilient layer, suitable for use as acoustic matting under most floor finishes such as ceramic tile, stone, vinyl, wood, carpet etc.

The material is manufactured from waste rubber and cork which is mixed with a polymer binder to form a purpose made resilient acoustic matting which has exceptionally good insulating qualities.

The RC matting has been developed for use in both commercial and residential buildings such as apartments, hotels, hospitals etc. EcoMat RC3 and EcoMat RC5 has been developed to meet the current Building regulations and is Document E compliant. It combines minimum build height with permanent resilience.		 EcoMat RC3 and EcoMat RC5

ACOUSTIC PERFORMANCE

Impact Sound Insulation:
EcoMat 3mm Δ LW 18dB
EcoMat 5mm Δ LW 20dB
Measured in accordance with BS EN ISO 140-8 1998

ecomat Detail



  • EcoMat3 or EcoMat5 bonded to structural sub-floor.
  • ≥300kg/m² hollow core concrete planks with 80kg/m² sand/cement screed or proprietry screed.
  • 75mm void formed by metal frame suspended ceiling system.
  • ≥10kg/m² gypsum board ceiling.


Detail



  • EcoMat3 or EcoMat5 bonded to structural sub-floor.
  • ≥300kg/m² cast in-situ concrete with 80kg/m² sand/cement screed or proprietry screed.
  • 75mm void formed by metal frame suspended ceiling system.
  • ≥10kg/m² gypsum board ceiling 75mm below underside of sub-floor supported under resilient bars at 400mm centres perpendicular to the battens.


GENERAL PHYSICAL DATA
Roll Size:-1m x 20m (1m x 10m to special order)
Thickness:-3mm or 5mm
Density:-approx. 390Kg/m³
Elongation at break:-approx 60%
Flammability rating:-B2
Colour:-Black/beige
Tensile strength:-0.6N/mm²
Castor chair suitability:-Yes
Service temperature:--30°C to 80°C
Heat conductivity:-approx. 0.12 - 0.19 W/mk
Environmental behaviour:-Limited resistance to acid
Coefficient of friction:-AVR O.66

Acoustic Underlay for Laminate Flooring

All information contained in these details is given in good faith but without warranty.
Custom Audio Designs reserves the right to alter the specifications of any product without notice.

©Custom Audio Designs

Valid HTML 4.01 Transitional