Tilesorption dBtile acoustic ceiling tiles for lay in ceiling grids offices
Tilesorption dBtile acoustic ceiling tiles for lay in ceiling grids offices
Tilesorption dBtile acoustic ceiling tiles for lay in ceiling grids offices Tilesorption dBtile acoustic ceiling tiles for lay in ceiling grids offices Tilesorption dBtile acoustic ceiling tiles for lay in ceiling grids offices Tilesorption dBtile acoustic ceiling tiles for lay in ceiling grids offices Tilesorption dBtile acoustic ceiling tiles for lay in ceiling grids offices
Tilesorption dBtile acoustic ceiling tiles for lay in ceiling grids offices
Tilesorption dB-Tile Acoustic Suspended Ceiling Tile
USES:
  • Suspended lay in ceiling grid.
  • Offices.
  • Meeting Rooms.
  • Schools.
  • Can be used to meet BB93
 BENEFITS:
  • Easy DIY Installation
  • Performs far better than standard tiles
  • Class 0 fire rated.
  • Provides up to 49dB Dncw
  • Tegular or square edged.
  • Only 20mm thick.


Tilesorption dBtile acoustic ceiling tiles for lay in ceiling grids offices   Tilesorption dBtile acoustic ceiling tiles for lay in ceiling grids offices  Tilesorption dBtile acoustic ceiling tiles for lay in ceiling grids offices

As the name suggests, Tilesorption dB-Tile is specifically designed to meet an optimum balance in sound performance, manufactured from bio-degradable mineral wool, inorganic fillers and binders.

dB-Tiles have been designed to optimise the balance between sound absorption and sound insulation. They are much thicker than general purpose tiles and have surface needle perforations with a reverse side acoustic coating to achieve the very best balance in acoustic performance.

The product is available in 600x600mm module sizes for Square edge and T24 Tegular edge. Because of the close manufacturing tolerances the square edge tile may be used on both 24mm and 15mm wide grids.
Technical Data

Sizes
Square edge 600 x 600mm (nominal)
T24 Tegular edge 600 x 600mm (nominal)

General data
Composition: Produced from bio-degradable mineral wool, inorganic fillers and binders
Grid system: Exposed grid system
Edge detail: Square edge and Tegular edge to suit 24mm grid width
Thickness: 20mm nominal
Weight: Tiles approximately 7.7kg/m. Exposed grid system 1.5kg/m
Surface patterns: Light texture with needle perforation on face. Reverse acoustic coating. Non shedding
Colour: White - 2 coats dispersion type paint, free from organic solvents
Light reflection: Approx 84%

Fire performance
Material classification: EN 13501-1, A2-s1, d0
BS476: Part 23 steel beams None
BS476: Part 21 timber floors None
BS476: Part 21 mezzanine floors None

Acoustic properties
Sound absorption NRC: 0.45
Sound absorption αw: 0.45
Absorption: class D
Sound insulation: ( Dncw ) up to 49dB (Room to Room) contact our technical department for guidance.

Relative humidity value
Approx 95%

Handling and Storage
Tilesorption should be stored flat in clean and dry conditions. Do not rest cartons or tiles on edges or ends

Installation
Installation should be in accordance with EN13964:2004

Tilesorption dBtile acoustic ceiling tiles for lay in ceiling grids offices

acoustic plasterboard

All information contained in these details is given in good faith but without warranty.
Custom Audio Designs reserves the right to alter the specifications of any product without notice.

Valid HTML 4.01 Transitional

©Custom Audio Designs 2008