Acoustic Resilient layer for under screed isolation UK
Acoustic Resilient layer for under screed isolation UK
Acoustic Resilient layer for under screed isolation UK Acoustic Resilient layer for under screed isolation UK Acoustic Resilient layer for under screed isolation UK Acoustic Resilient layer for under screed isolation UK Acoustic Resilient layer for under screed isolation UK
Acoustic Resilient layer for under screed isolation UK
ACOUSTIBOARD-F
USES:
  • Separating Floors.
  • Concrete Floors.
  • Robust Detail FFT5 Compliant.
 BENEFITS:
  • Robust Detail Compliant FFT5.
  • Provides significant reduction in impact noise and vibration.
  • Easy to install.
  • Does not significantly increase the floor level.



ACOUSTIBOARD-F (Part Code A420)
AcoustiBoard-F is designed to provide excellent acoustic sound insulation with ease of installation. No need for separate isolation layers and T&G chipboard. The product is a laminate of 5mm IsoScreed bonded to the bottom of 18mm P5 moisture resistant tongue and grooved chipboard.

AcoustiBoard-F meets the Robust Details for Floating Floor Treatment 5, for constructions E-FC-1, E-FC-2 and E-FS-1.

AcoustiBoard-F also complies with Part E Regulations as an overlay solution for a refurbished timber floor.
acoustic flooringDownload PDF
acoustic flooring
Incorporating the latest changes to the Approved Document E 2003, the minimum and maximum sound insulation requirement for separating floors are as follows:
  

   Conversion

   New Build		 Airborne Sound Reduction DnTw+C;tr

43dB or greater

45dB or greater		 Impact Sound Level LnTw

64dB or less

62dB or less


To comply with the requirements of the  Approved Document E 2003, AcoustiBoard-F sound insulated separating floors have been tested in accordance with BS EN ISO 140-6:1998 and rated in accordance with BS EN ISO 717-2:1997.
You need to either upgrade your Flash Player or install Flash or turn on Javascript to view missing content. You can download the pluggin from Adobe Here.
You need to either upgrade your Flash Player or install Flash or turn on Javascript to view missing content. You can download the pluggin from Adobe Here.
Tested Performance of the Above Structure:-
  Airbourne              Impact
Rw=59dB (Ctr-10)    Lnw59dB
Rw + Ctr= 49dB


Further improvements can be made by placing 19mm Gypsum based plank over the sub floor before installing the AcoustiBoard-F.
If this is undertaken first then improved results will be:
  Airbourne              Impact
Rw=62dB (Ctr-8)    Lnw54dB
Rw + Ctr= 54dB


SEPARATING FLOORS / CONCRETE FLOOR / ROBUST DETAIL FLOATING FLOOR TREATMENT 5 / Rd Delta LW18dB

You need to either upgrade your Flash Player or install Flash or turn on Javascript to view missing content. You can download the pluggin from Adobe Here.
GENERAL PHYSICAL DATA
Sheet Size-2400 x 600mm
Thickness-23mm (above screed)
Weight-13.165kg/m²
Full System Fire Protection-60 minutes
Sheet per pallet-52

acoustic flooring



All information contained in these details is given in good faith but without warranty.
Custom Audio Designs reserves the right to alter the specifications of any product without notice.
©Custom Audio Designs 2006

Valid HTML 4.01 Transitional