Custom Audio Designs Ltd
Independent Acoustics and Noise Control Expertise
 

Acoustic Absorbers | Sound Absorbers | Acoustic Panels | Absorption Tiles


Jocavi ATP Acoustic Panels and Home Cinema Treatment packsJocavi ATP Acoustic Panels and Home Cinema Treatment packsJocavi ATP Acoustic Panels and Home Cinema Treatment packsJocavi ATP Acoustic Panels and Home Cinema Treatment packsJocavi ATP Acoustic Panels and Home Cinema Treatment packs


jocavi acoustic panels

Acoustic Treatment Packs and Products

Jocavi ATP Acoustic Panels and Home Cinema Treatment packs
jocavi acoustic panels jocavi acoustic panels
Jocavi Acoustic PanelsJocavi Acoustic Panels
Jocavi Acoustic PanelsJocavi Acoustic Panels
jocavi acoustic panelsjocavi acoustic panels
Jocavi Acoustic PanelsJocavi Acoustic Panels
Jocavi Acoustic PanelsJocavi Acoustic Panels
jocavi acoustic panelsjocavi acoustic panels
Jocavi Acoustic Panels
Jocavi Acoustic Panels

INTRODUCTION

Popularity of the home studio market has lead to the frequent improvisation of acoustic solutions that do not transfer good results from one room to another.

With this in mind, Custom Audio Designs' Technical Team recommend the new ATP® range featuring selected acoustic treatment products and solutions which are practical and accessible to everyone

These are tested solutions for those customers who wish to solve the acoustics of their room in a proper manner and with a realistic budget.

The ATP® range includes a choice of five acoustic panel packs (with two version options per pack) corresponding to five different room sizes from 9m² to 40m².

 

The rooms were acoustically simulated with the dimensions mentioned in each case and later verified with acoustic analysis.

They may be used, as a comparison, to find a solution for your own space. The Standard versions contain the basic absorption components, the Excellence versions contain absorption, diffusion and, in the latter cases, tuned low frequency absorption.

These options are for customers looking for practical, low cost solutions coupled with a refined aesthetic look.

The ATP® packs are easy to fit and come complete with all the glues and instructions for anyone to install them easily. Expert technical guidance is available from our Technical Support Team


3D Renders - Hover Over to Enlarge




jocavi acoustic panels

Individual ATP Acoustic Panels

Pyramid
pyramid
ATP® Pyramid.
Mid Range Diffusive and Absorptive Panel.
NRC 0.75 [>100Hz; <5kHz]
Stripefuser
stripefuser
ATP® Stripefuser.
Mid Range Diffusion Panel.
NRC 0.26 [>100Hz; <5kHz]
Wavyfuser
wavyfuser
ATP® Wavyfuser.
Mid Range Diffusion Panel.
NRC 0.21 [>100Hz; <5kHz]
Cubefuser
mellowbaffle
ATP® Cubefuser.
Mid range Absorption / Diffusion Panel.
NRC 0.47 [>100Hz; <5kHz]
Reflex
lightwalltrap
ATP® Reflex.
Mid Range Diffusion Panel.
NRC 0.26 [>100Hz; <5kHz]
Stripecombi
mellowalltrap
ATP® Stripcombi.
Mid Range Absorber / Diffuser Panel.
NRC 0.54 [>100Hz; <5kHz]
Foamsorb
lightwalltrap
ATP® Foamsorb.
Mid Range Absorption Panel.
NRC 0.95 [>250Hz; <10kHz]
Stripesorb
mellowalltrap
ATP® Stripesorb.
Mid Range Absorption Panel.
NRC 0.81 [>250Hz; <10kHz]
Cosmos
lightwalltrap
ATP® Cosmos.
Mid Range Absorption Panel.
NRC=0.94 [>250Hz; <1kHz]
Widebaffle
mellowalltrap
ATP® Widebaffle.
Suspended Absorption Panel.
NRC 0.81 [>250Hz; <10kHz]
Trap 30S/30R
lightwalltrap
ATP® Trap 30S/30R.
Low Range Absorption Panel.
NRC 0.95 [>250Hz; <10kHz]
Cubesorb
mellowalltrap
ATP® Cubesorb.
Mid Range Absorption Panel.
NRC 0.81 [>250Hz; <10kHz]
Basskeeper Angle
lightwalltrap
ATP® Basskeeper Angle.
Low Range Absorption Panel.
NRC 0.95 [>100Hz; <250Hz]
Basskeeper Wall
mellowalltrap
ATP® Basskeeper Wall.
Low Range Absorption Panel.
NRC 0.81 [>100Hz; <250Hz]
Slimbass
lightwalltrap
ATP® Slimbass.
Low Range Absorption Panel.
NRC 0.75 [>100Hz; <250Hz]
Slimbass Wall
slimbass wall
ATP® Slimbass Wall
Low range absorption panel.
NRC 0.60 [>100Hz; <250Hz]

Introduction

Our selected 'Jocavi' acoustic treatment panel range is a prestige brand widely-recognised for its high-end acoustic performance.

Suitable for both professional and high-end residential use you can select from a diverse range including diffusion models and low frequency tuned panels.

This range provides the designer with an interesting and rare variety of solutions to create visually exciting, high-performing interiors. Several types of absorption and diffusion panels are available, imagine that, created with 43 different materials through semi-automated and manual processes.

The resulting materials are really well taken care of during the whole process of design to manufacture and customers and clients can be assured of our highly competent technical customer service. Quality is our main concern.

For further information and specification details please browse below.

For professional guidance or material commissions please contact our Technical Team.

For high-end 'prestige' solutions suitable for residential and commercial use, please browse our Jocavi range below.

 
Ebony
ebony
Jocavi® Ebony Absorber.
Mid Range Absorber Panel.
NRC 0.69
AddSorb
addsorb
Jocavi® Addsorb.
Mid Range Absorber Panel.
NRC 0.82
ConvexAbsorber
convexabsorber
Jocavi® Convexabsorber.
Wide Band Absorber Panel.
NRC 0.80

Ivory
jocavi ivory
CoralReef
jocavi coralreef
WooDiffusor
jocavi wood diffuser
Two FX
jocavi two FX
SquaryDiffusor
jocavi squary diffuser
CeraFlector
jocavi ceraflector
DynamicFlow
jocavi dynamic flow
Effectfuser
jocavi effectfusser

TubaSorbaBass TrapTubaSorber SYProCornersWallTrapjocavi walltrapRound BassCorner
jocavi round bass corner
Bass Cornerjocavi bass corner

Recording Studio Accessories


microphone protector

Microphone Protector

This accessory is more useful to sound engineers and technicians than to musicians themselves.

This accessory is original, unique, highly necessary and in high demand. It is often used by sound engineers to capture more of the individual sounds when a number of instruments are in close proximity to each other.

The MP1® surrounds the microphone, isolating more of the sound that is captured which can be extremely useful at live events when utilising nosie gates and compressors as it provides them with more accurate control.

It is ideal to use under and over snare drums, as well as floor toms, jazz bass drums, guitar amplifiers, basses or whatever requires more close miking.

Features:

  • Insulation protector for microphones.
  • Acoustically separates sound capturing.
  • Fits most microphone models.
  • Installation: on a microphone tripod.
  • Dimensions: 220 x 110 x 85 mm.
  • Colour: gray, transparent and glossy.

microphone protector

Horndiffuser

This accessory works as a close acoustic diffuser for trumpeters, trombonists and sax players.

It is applied around the microphone and provides the musician with the direct return of the sound that they play.

Besides the advatage to the musician it also provides benefits to the sound engineer as it helps isolates the mic from the sound that comes from the foldback monitors.

Its curved shape is optimised with the aim of focusing on the musician the reflected sound in the most efficient way.

Features:


  • Acoustic reflecor for wind instruments.
  • Increases the return of direct sound to musician.
  • Isolates against foldback speakers.
  • Installation: on a microphone tripod.
  • Dimensions: diameter 290mm.
  • Colour: Transparent and Glossy.

microphone protector

Pop Off

Sometimes a singers voice can cause clipping on the mic membrane.

The Pop Off is an ideal filter for the microphone which reduces the popping or sibilance effects without reducing the dynamics.

It has a strong flexible arm which is securely fastened to the tripod.

Its curved shape is optimised with the aim of focusing on the musician the reflected sound in the most efficient way.

Features:

  • Microphone filter.
  • Eliminates popping and sibilance.
  • Installation: on a microphone tripod.
  • Dimensions: diameter 165mm.
  • Colour: Black.

reflection-filter

Vocal Mic Reflection Filter

This parabola shaped accessory is a creative aid for the engineer enabling significant tonal variations by adjusting the position between the unit and the microphone.

The bell is sealed which improves the isolation from the room environment by reducing the amount of reflected energy from room surfaces making the captured sound more authentic.

The VRM Filters interior is made from three different absorbent materials and works extremely well in untreated rooms.

It can be used for singers as well as instruments.

Features:

  • Acoustic microphone bell.
  • Isolates the microphone from room effects
  • Installation: on a microphone tripod.
  • Dimensions: 580x380x240mm.
  • Colour: Grey and Black.

subwoofer-base

Sub Woofer Base

The SWB is a key piece for your setup when you use a sub-woofer. This accessory is essential for reducing the vibrations that result from the physical popagation of LF to other units within the same room.

The top part is stiff and causes a weight distribution across the whole area in contact with the floor.

The sizes are generally within the standards of most manufacturers of this type of speaker.

There are two different sizes: SWB1 and SWB2.

Features:

  • Anti vibration speaker abse.
  • Two sizes available
  • Installation: placed on the floor.
  • Dimensions: SWB1 400x400x90mm.
  • Dimensions: SWB2 500x580x90mm.
  • Colour: Grey.

nearfield-base

Near-Field Base

The NFB is an essential accessory for your music or control room.

It can work miracles on your rooms sound response minimising the physical propagation of vibrations to the nearby surfaces.

Fully adjustable.

There are two different sizes: NFB1 and NFB2.

Features:

  • Anti vibration speaker base.
  • Two sizes available
  • Installation: beneath nearfields.
  • Dimensions: NFB1 300x300x117mm.
  • Dimensions: NFB2 430x430x117mm.
  • Colour: Grey.

kick pad

Kick Pad

To tune and get the best sound out of a bass drum is sometimes a hard task.

The Kick Pad was created to absorb unwanted harmonics which are out of tune with the bass drum tone thus making the beat clearer and more defined.

The Punch Master is provided with the Kick Pad. This accessory allows you to fully control the bass drums head vibration accentuating its punch and deepness at every beat. Its ultra light material and attractive design makes it look distint and stylish. It also allows for protection against tearing from cables or mic tripods.

Features:

  • Kit includes Kick Pad and Punchmaster.
  • Bass Drum absorbent
  • For all drums ranging between 18" and 24"
  • Reduces unwanted internal reflections
  • Installation: inside the drum
  • Dimensions: 840x560x70mm.
  • Colour: Grey.

drum base

Drum Base

The ATP Drum Base is an anti-vibration platform for drum kits. Composed of 9 pieces that fit together and make up a total area of 4m² (2mx2m)

The material used in the contruction is non-skid, closed cell, recycled rubber of a specific density in order to exert the best inertia on the physical propagation of energy from the kit.

Its easy to assemble on the floor and comes complete with a custom sized carry bag.

There are two different sizes: NFB1 and NFB2.

Features:

  • Anti-vibration platform.
  • Fits most standard kits
  • 68% recycled material
  • Complete with carry bag
  • Installation: on the floor
  • Dimensions: 1970x1970x27mm.
  • Colour: Grey.

drum base

BABS

The BABS is an acoustic barrier system ideal for tracking rooms etc. It provides outstanding acoustic separation between each instrument or amplifier thus optimising separation.

It is also the ideal solution for portable acoustic treatment and can be used to improvise a rehearsal room, tracking room or control room etc.

It comes complete with a foot for each module.

Each face is acoustically and aesthetically different. One absorbs more than the other thus giving different acoustic environments.

An optional carry bag is available.

Features:

  • Portable acoustics.
  • Two acoustically different faces
  • Optional carry bag
  • Installation: on the floor
  • Dimensions: 1170x550x90mm.
  • Colour: Grey, blue black or beige.


All images and intellectual property above is the property of Jocavi®
All information contained in these details is given in good faith but without warranty.
Custom Audio Designs reserves the right to alter the specifications of any product without notice.
©Custom Audio Designs