Best practice details for jamb and sockets using acoustic metal stud systems

Independent Acoustics and Noise Control Specialists

Acoustic Studs \| Metal Studs \| Metal Tracks \| Acoustic Walls

Best Practice Details for Door Jambs and Sockets when using Acoustic Metal Studs


		Installation Details Set out in this section are Best Practice Solutions for the more common issues. Light Door Jambs Suitable for doors weighing up to 25kg.
Socket Detailing Our Acoustic, Intumescent socket pad is designed for lining electrical socket boxes in partition wall constructions. Our mouldable pad easily fit socket boxes to reduce sound travel through partition walls, whilst providing flexibility when fitting thus avoiding accidental tearing or puncturing. Cutting an electrical socket opening in a partition wall can reduce its acoustic performance and resistance to fire, which could therefore result in non-compliance with Part E and Part B Building Regulations. Our Acoustic Pads are the acoustically tested, intumescent solution complying with Building Regulations Part E and Part B. Benefits Tested for acoustic integrity up to 69dB Rw. Provides 2 hours fire resistance Easy to use and install		Medium Weight Door Jamb Suitable for doors weighing up to 50kg. Heavy Weight Door Jamb Suitable for doors weighing up to 75kg.




All information contained in these details is given in good faith but without warranty. Custom Audio Designs reserves the right to alter the specifications of any product without notice.

©Custom Audio Designs