 Independent Acoustics and Noise Control Specialists |
 |
|
Acoustic Absorbers | Sound Absorbers | Acoustic Panels | Absorption Tiles | ||
 | ||
 |
 |
 |
 |
 |
|
FEATURES:
|
APPLICATIONS:
|
|
Prosonic FG Acoustic Panels
 Download PDF
Prosonic FG Acoustic Panels have a rigid, acoustic-rated, high quality fibreglass core with a class1 or class0 fabric covering available in an extremely wide selection of colours. These panels are an efficient, durable, cost-effective solution for reducing excessive reverberation in large spaces. Units can also be custom made with hooks and wires for easy ceiling mounts or split battens for easy wall mounting which is ideal if you require them to be removable. |
||
 | |||
Available in a wide range of different shapes as shown below:
   
| |||
| |||
|
Also available with a digitally printed fabric face.
Virtually any image can be used as long as the aspect ratio is maintained and the resolution is high enough for the panel size. Contact us for more details. |
||
| |||
|
Advantages
|
 Click to enlarge |
Standard Unit Construction
|
| ||
|
Product Options (at additional cost)
Fabric Selection
As well as rectangular panels but we can also make square, round, triangular, circular or parallelogram shaped panels. We can also accomodate cutouts for light sockets, switches, odd angles etc. |
Edge Selection
|
| |
|
FIXING OPTIONS When ordering panels please advise us if you need fixings. Panels are supplied without them unless specifically requested. Certain types need to be specified in advance. There will be an additional cost for supplying various clips, glues, chains, wires, battens etc. If you are unsure about what to use please contact our Technical Department. | ||
|
 |
  |
Standard Surface Mount Timber Split Battens. For wall mounting a split batten is fixed to the wall. The acoustic panel is offered up to the wall brackets and simply lowered in place. The split batten on the back of the panels allows easy removal as well as providing an additional 15mm airspace behind the absorber for improved LF acoustic absorption. (This option is only available for panels of 50mm or thicker). Aluminium Batten This is a similar method but much thinner. It leaves virtually no gap between the panel and the wall. This system is only available for 25mm thick panels. |
| ||
 |
|
Direct Recessed Timber Split Battens.
For wall mounting larger heavier panels when the panel needs to sit flush against the wall. The battens from the system above are embedded into the back of the panel thus allowing it to provide a snug fit. The split batten on the back of the panels allows easy removal and replacement. (This option is only available for panels of 50mm or thicker). |
| ||
 |
Wall Spikes
Metal impaling clips are screwed into the wall. Adhesive is applied to the panel and the wall. The panel is then offered up against the wall spikes and fixed in place. This method does not allow easy removal of the panels. For smaller panels spikes can be used without adhesive so the panels can be removed however this does not provide a permanent fix so would not be suitable in areas such as schools. | |
| ||
 |
Embedded bar with chains or wires
This option allows very large heavy panels to be hung from the ceiling at a pre-determined distance. This option is only available on 50mm thick panels. | |
| ||
 |
Metal 'Z' Bars
This option allows very large heavy panels to be hung close from the ceiling and is especially suited to sloped ceilings. This option is only available on 50mm thick panels. | |
| ||
 |
Hooks
Probably the easiest and most versatile method of hanging from ceilings. The hooks are simply screwed into the panel which can then be hung from chains. Not generally recommended for large heavy panels. | |
| ||
 |
Magnets
Ideal for fixing panels to a metal surface. This option is only available on 50mm thick panels upwards. Ideal if you want the panels to be easily removable. Can be used for walls or ceilings. | |
| ||
 |
Wire Hanging Systems
Hanging wire, hooked, 1.5mm Hanging wire, Cable, 1.5mm Eclipse Thin Thick Angled Ceiling Gated Hook | |
| ||
 
 
 
| |
       |
|
 
 
|
|
|
| All images and intellectual property above is the property of RPG Diffusor Systems, INC |
| All information contained in these details is given in good faith but without warranty.
Custom Audio Designs reserves the right to alter the specifications of any product without notice. |
| ©Custom Audio Designs |
|
|